Heating controls

Been a mixed week. The bath surround has almost been completed - just waiting for the tiles to be delivered now. Some plastering in the snug - once that's been skimmed, it will be ready for decorating. The kids room is still the tool store so no chance to decorate yet. The rear hall now has skirting boards so a few bits of plastic trim around the windows and the radiator and that's done (plus another coat of paint!). The light is up and (I think) it just needs the circuit breaking closing to make it work. The utility needs the door panel fitting, the radiator and the tiling round the sink then it's time for the washing machine, drier and fridge and the units.

The big thing this weekend was the thermostats came on-line! We now have control of the heating downstairs, and even after one day it's better. With UFH you don't turn it on and off, you 'set it back' - ie. turn it down - overnight. So we are running the main room at 22 degrees from 6am to 10.30pm and 16 degrees overnight. The thermostats take care of warming up and cooling down so the room should be at the chosen temp at the chosen time. This morning it was 20 degrees at 6am so tomorrow it will switch on earlier!

The controls come from Heatmiser in Darwen, Lancs.... very swish they are too!


Parlo ripped the landing apart yesterday taking out the old bathroom doorway to keep the ceiling level throughout the landing. He started plasterboarding as well so that should be boarded and ready for skimming today (?). Hopefully they will get on with the raidators today but the plumber has gone AWOL at the moment. And, yet again, we are waiting for the sparky's next visit...... Still plenty to do, but nothing that should hold the build up now.... apart from the isolator switch bank for the appliances, which all have their own fused spur anyway, it's mainly fittings now - switches, lights, etc.....

Ah.... the ensuite. Although we had success with one lot of UFH, the en-suite Walkwarm system failed to start. We are waiting to find out what's wrong. Worst case is the ribbon of wire was damaged, in which case the tiles will have to come up..... so we're going to wait until the bathroom is ready before we even think about that.