The UFH - not much to show for over 3 grand! A bit of swirly red piping and the manifold from the previous post. This was the 23rd November.
The screed company let us down on the saturday. The driver didn't turn in so no delivery but no-one told our guys so everyone was hanging around waiting. Eventually we found out and after some argy bargy, Martin's screed guy got onto Tarmac for a delivery monday afternoon... and here it is. Monday 26th.
Luverly and smooth - trouble is a dog got in chasing our cat overnight and got footprints right across here!! Geoff got rid fo the worst of them near the front door but we'll have some sanding and filling to do when it's done. This stuff is Tarmac Truflo.
Now the floor cost another £2K. We were going to use normal sand and cement screed but a few things swayed us. Firstly, we can turn the heating on after 3 days with this stuff - it's 3 WEEKS with the sand and cement - and we have no other heating downstairs. Secondly, we want Karndean flooring on top and that needs a smooth surface - so hopefully we'll save a few quid not needing the floor levelling (well - apart from the dog prints that is!). Lastly, this is the recommended screed for UFH as being liquid it runs round the pipes and you're not supposed to get cold spots. Unfortunately, what is not supposed to happen is the floor to get very wet.... then we had 80mph winds and torrential rain all weekend, the temporary roofing got blown off and we had 1/2inch of standing water. Geoff made temporary repairs on sunday and on monday finished most of the roof so Sarah and Stephen mopped up and it's been virtually dry since - we still have a bit of a leak around the Velux so a bit more work to do but it's coming.
By the friday Geoff had got us some stairs and on the saturday we moved back in.... hmm..
Here is a slightly dark picture of the main room. The shuttering is where the new doorway will be, but until the uPVC company and Geoff agree which order the rear porch roof is getting done in, we have no doorway as such....
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment